High-Temperature Sealing: How to Prevent Failures in Extreme Conditions?

Do your seals break down under high heat? If your equipment runs hot, regular seals won’t last — and failure can be catastrophic.

High-temperature sealing requires the right materials and designs to handle extreme environments. Here’s how I help customers prevent failures in real-world high-heat operations.

From engine compartments to industrial furnaces, sealing at 150°C+ is no joke. Choosing the wrong seal could mean downtime, leaks, or even full equipment shutdown.

What Causes Seal Failure at High Temperatures?

The most common causes are material degradation, thermal expansion mismatch, and insufficient lubrication. If the seal material softens, cracks, or shrinks under heat, you’re headed for failure.

High temperatures:

• Harden elastomers (loss of flexibility)
• Accelerate chemical breakdown
• Cause thermal cycling fatigue

How to Seal Effectively at High Temperatures

I’ve worked with clients across automotive, chemical, and heavy industry — all facing the same issue: heat kills standard seals. Here’s how to fight back:

1. Choose the Right High-Temperature Material

Avoid NBR and EPDM for high heat — they break down fast above 120°C.

2. Watch Out for Thermal Expansion

• Shaft and housing expand differently with heat
• Too tight = seal shear
• Too loose = leakage

사용 thermal expansion charts and allow extra clearance in your seal groove design.

3. Use High-Temp Grease or Dry Lube

Standard oils can evaporate or burn. Use:

• Silicone-based grease (to 250°C)
• Moly or PTFE-based dry films
• Or consult our high-pressure oil seal guide for combined specs

Where Are High-Temp Seals Most Needed?

Custom requests? We support high-temp seal customization for all sectors.

Tips to Prevent High-Temperature Seal Failure

1. Always match material to media

   • Use FKM for fuel/oil
   • Use PTFE for acids and steam

2. Consider cycling temperature

   • For fluctuating heat, flexible compounds like silicone perform better

3. Inspect regularly

   • Look for hardening, cracking, or residue buildup

4. Design for tolerance

   • Consider groove expansion, shaft movement, and seal stretch

결론

High-temperature sealing isn’t about luck — it’s about the right material, the right design, and the right supplier. Don’t let heat ruin your system.

행동 촉구

Need reliable high-temperature O-rings or oil seals?
We’ll match you with the best material for your exact working conditions — no MOQ required.

• 이메일: [email protected]
• 왓츠앱: +86 17622979498
  Send us your application temperature and media — we’ll respond with a custom quote in 12 hours.

사람들은 또한 묻습니다